Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography-Reference-Cited by-同舟云学术

Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography

Published:2017-06-05 Issue:1 Volume:15 Page:17-36
ISSN:1768-6733
Container-title:Quantitative InfraRed Thermography Journal
language:en
Short-container-title:Quantitative InfraRed Thermography Journal

Author:

Maierhofer Christiane¹,Krankenhagen Rainer¹,Röllig Mathias¹,Rehmer Birgit¹,Gower Mike²,Baker Graham²,Lodeiro Maria²,Aktas Alper²,Monte Christian³,Adibekyan Albert³,Gutschwager Bernd³

Affiliation:

1. Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany

2. NPL National Physical Laboratory, Materials Division, Teddington, UK

3. PTB Physikalisch Technische Bundesanstalt, Berlin, Germany

Funder

EMRP

Publisher

Informa UK Limited

Subject

Electrical and Electronic Engineering,Instrumentation

Link

https://www.tandfonline.com/doi/pdf/10.1080/17686733.2017.1334312

Reference15 articles.

1. Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission

2. Damage detection in CFRP by coupling acoustic emission and infrared thermography

3. Damage investigation in CFRP composites using full-field measurement techniques: Combination of digital image stereo-correlation, infrared thermography and X-ray tomography

4. Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Data-Augmented Manifold Learning Thermography for Defect Detection and Evaluation of Polymer Composites;Polymers;2022-12-29

2. Research on Charge Transfer Characteristics Induced by Laser Irradiation Monocrystalline Silicon;International Journal of Thermophysics;2020-04-08

3. Quantification of Delaminations in Semitransparent Solids Using Pulsed Thermography and Mathematical 1D Models;International Journal of Thermophysics;2020-03-17

4. Application of thermographic testing for the characterization of impact damage during and after impact load;Composites Part B: Engineering;2019-09

5. Numerical modelling and experimental evaluation of the composites using active infrared thermography with forced cooling;Quantitative InfraRed Thermography Journal;2019-06-11