Laser additive manufacturing foam aluminium-12 wt-% silicon with different addition TiH2 foaming agent-Reference-Cited by-同舟云学术

Laser additive manufacturing foam aluminium-12 wt-% silicon with different addition TiH2 foaming agent

Published:2017-12-19 Issue:8 Volume:34 Page:968-981
ISSN:0267-0836
Container-title:Materials Science and Technology
language:en
Short-container-title:Materials Science and Technology

Author:

Zhang Min¹²,Chen Changjun¹²,Huang Yong¹

Affiliation:

1. State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou, Gansu, People’s Republic of China

2. Laser Processing Research Center, School of Mechanical and Electrical Engineering, Soochow University, Suzhou, Jiangsu, People’s Republic of China

Funder

National Natural Science Foundation of China

State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology

Suzhou Science and Technology Bureau

Publisher

Informa UK Limited

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.tandfonline.com/doi/pdf/10.1080/02670836.2017.1415014

Reference30 articles.

1. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder

2. Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing

3. Laser additive manufacturing of M2 high-speed steel

4. Effect of laser processing parameters on mechanical properties of porous tantalum fabricated by laser multi-layer micro-cladding

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Wire Arc Additive Manufacturing of Aluminum Foams Using TiH2-Laced Welding Wires;Materials;2024-06-28

2. Laser additive manufacturing of aluminum-based stochastic and nonstochastic cellular materials;Journal of Materials Science & Technology;2024-06

3. Effect of Mg Content Change on the Production of Closed-Cell Aluminum Alloy Foam by Selective Laser Melting;Physics of Metals and Metallography;2023-12-29

4. Production of MWCNT-Reinforced Aluminum Foams Via Powder Space-Holder Technique and Investigation of their Mechanical Properties;Transactions of the Indian Institute of Metals;2022-04-16

5. Fabrication of Al/SiC composite foams with TiH₂ foaming agent by laser melting deposition;Materials Research Express;2022-04-01