Relationship between Uniaxial Thermal Stress and Strain Test (UTSST) parameters and field cracking data of asphalt mixtures from MnROAD test experiment-Reference-Cited by-同舟云学术

Relationship between Uniaxial Thermal Stress and Strain Test (UTSST) parameters and field cracking data of asphalt mixtures from MnROAD test experiment

Published:2023-01-28 Issue:2 Volume:24 Page:
ISSN:1029-8436
Container-title:International Journal of Pavement Engineering
language:en
Short-container-title:International Journal of Pavement Engineering

Author:

Elias Nicole G.¹^ORCID,Hajj Elie Y.²^ORCID,Sebaaly Peter E.³^ORCID,Morian Nathan⁴^ORCID,Vrtis Michael⁵^ORCID

Affiliation:

1. Department of Civil and Environmental Engineering, University of Nevada, Reno, NV, USA

2. Associate Director of the Western Regional Superpave Center, Department of Civil and Environmental Engineering University of Nevada, Reno, NV, USA

3. Director of the Western Regional Superpave Center, Department of Civil and Environmental Engineering University of Nevada, Reno, NV, USA

4. Maintenance and Asset Management Division, Nevada Department of Transportation, Carson City, NV, USA

5. Research Project Engineer, Minnesota Department of Transportation, Saint Paul, MN, USA

Publisher

Informa UK Limited

Subject

Mechanics of Materials,Civil and Structural Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/10298436.2023.2276156

Reference16 articles.

1. AASHTO, 2013. Aashto TP 105: standard method of test for determining the fracture energy of asphalt mixtures using the semicircular bend geometry (SCB). Washington, DC: American Association of State Highway and Transportation Official.

2. AASHTO, 2016. Aashto TP 125: provisional standard method of test for determining the flexural creep stiffness of asphalt mixtures using the bending beam rheometer (BBR). Washington, DC: American Association of State Highway and Transportation Official.

3. AASHTO, 2019. Aashto R 30: standard practice for mixture conditioning of Hot Mix asphalt (HMA). Washington, DC: American Association of State Highway and Transportation Official.

4. Low temperature characterization of asphalt mixtures by measuring visco-elastic properties under thermal loading;Alavi M. Z.;ISCORD 2013: Planning for Sustainable Cold Regions, ASCE,2013

5. ASTM Standard D8303, 2020. Standard test method for determining thermal cracking properties of asphalt mixtures through measurement of thermally induced stress and strain. West Conshohocken, PA: ASTM International.