Abstract
AbstractThe circulating cooling water system (CCWS) is a commonly used auxiliary system in industrial production, and it is also one of the main energy-consuming systems. The operating conditions of the system vary with the temperature changes caused by seasons, day and night, causing different energy consumption. If the system still maintains conditions when the actual conditions change, energy would be wasted. Operation optimization for the system can improve the operation effect of the system, reduce energy consumption, and increase operating efficiency. Therefore, through operation mechanism analysis for the main energy-consuming components of the CCWS that has been put into use, an operation optimization model is established integrating the domain knowledge. After that, an adaptive differential evolution (ADE) algorithm is proposed by introducing the adaptive mutation and crossover operator to solve the model. According to the minimum circulating water volume and air volume required by the system under different working conditions, the optimal start-up combination mode and operating frequency of the water pumps and fans are determined. And then, the optimal opening values of the regulating valves and baffles in the system are determined, thereby saving the energy of the system. Considering system operation knowledge, the synchronous optimization of the operation mode and operation status of the components in the system is realized. Finally, the effectiveness of the optimization method is verified through a case study.
Funder
National Natural Science Foundation of China
Fundamental Research Funds for the Central Universities
Publisher
Springer Science and Business Media LLC
Subject
Computational Mathematics,General Computer Science
Reference32 articles.
1. Chuanpu, Xu., Zuqing, C.: Research on the saturated water share of steam side space in the dynamic process of heat exchanger of heat recovery system in thermal power plant[J]. Proc. Chinese Soc. Electr. Eng. 013(004), 31–36 (1993)
2. Qureshi, B.A., Zubair, S.M.: A complete model of wet cooling towers with fouling in fills[J]. Appl. Therm. Eng. 26(16), 1982–1989 (2006)
3. Mekel F. : Verdunstungkühlung[C]. VDI-Verl. Forschungsarbeiten. No3275, Berlin, 1925.
4. Kim, J., Smith, R.: Cooling water system design[J]. Chem. Eng. Sci. 12, 3641–3458 (2001)
5. Panjeshahi, M.H., Ataei, A.: Application of an environmentally optimum cooling water system design to water and energy conservation[J]. Int. J. Environ. Technol 5(2), 251–262 (2008)
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献