Abstract
AbstractIncreased frequency of extreme weather events has made the conservation of riverbanks and coastlines a global concern. Soil stabilisation via microbially induced calcite precipitation (MICP) is one of the most eco-suitable candidates for improving resilience against erosion. In this study, the erosion characteristics of soil treated with various levels of biocementation are investigated. The samples were subjected to hydraulic flow in both tangential and perpendicular directions in a flume to simulate riverbank and coastal situations. Soil mass loss, eroded volume, and cumulative erosion rates of the treated soil against the applied hydraulic energy density have been reported. Post erosion exposure, the residual soil has been assessed for its properties using needle penetration resistance, precipitated calcium carbonate content and microstructure. It was observed that soil erosion declined exponentially with the increase in calcium carbonate content against the perpendicular waves. However, biocementation leads to brittle fracture beyond a threshold, limiting its efficacy, especially against the tangential waves. Additional composite treatment with a biopolymer was found to improve the resilience of the soil specimens against erosion. The composite treatment required half of the quantity of the biocementing reagents in comparison to the equally erosion-resistant plain biocemented sample. Therefore, stoichiometrically the composite treatment is likely to yield 50% lesser ammonia than plain biocement treatment. This investigation unravels a promising soil conservation technique via the composite effect of biocement and biopolymer.
Funder
Australian Research Council
Curtin University
Publisher
Springer Science and Business Media LLC
Subject
Earth and Planetary Sciences (miscellaneous),Geotechnical Engineering and Engineering Geology
Reference67 articles.
1. Al Qabany A, Soga K (2013) Effect of chemical treatment used in MICP on engineering properties of cemented soils. Géotechnique 63:331–339. https://doi.org/10.1680/geot.SIP13.P.022
2. Ashton A, Murray AB, Arnoult O (2002) Formation of coastline features by large-scale instabilities induced by high-angle waves. Nature 415:666–666. https://doi.org/10.1038/415666a
3. ASTM D4254-16 (2006) Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density. ASTM Int. West Conshohocken, PA.
4. ASTM D4972-19 (2019) Standard Test Methods for pH of Soils. ASTM Int. West Conshohocken, PA.
5. ASTM D6913/D6913M-17 (2017) Standard Test methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis. ASTM Int. West Conshohocken, PA.
Cited by
16 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献