DEM study on the effect of particle shape on the shear behaviour of granular materials

Abstract

AbstractThis study investigates the effects of particle convexity, sphericity and aspect ratio (AR) on the behaviour of sheared granular materials using two-dimensional discrete element method simulations. Isotropic, dense and loose assemblies with different particle shapes were prepared and subjected to drained shearing via biaxial compression until the critical state was reached. Macroscopic characteristics such as strength and dilatancy are presented. The factors underlying the macroscopic behaviour are then investigated by considering the coordination number, fabric anisotropy, particle moment, friction mobilisation at contacts and particle rotation. For the range of shapes considered here, the data indicate that the shear strength decreases as particle convexity and sphericity increases while the shear strength increases with increasing AR. The shear strength and convexity are weakly correlated, however a stronger correlation is observed between AR and strength. The volumetric strain at large strains tends to increase with increasing AR. There is a stronger correlation between the critical state strength and both the critical state coordination number and the critical state mechanical void ratio than there is between the critical state void ratio and the critical state strength. The contact fabric anisotropy, the magnitude of the moment transmitted by particles and the friction mobilised at the contacts are important factors underlying strength. The critical state strength increases as both the mean particle moment and the mean mobilised friction increased. Analysis of particle rotation provides insights into the response of the granular materials to shearing.