Height of Water Pool in the Roll Nip of Secondary Cooling Zone in Continuous Slab Caster: Application of Open Channel Hydraulics

Abstract

AbstractIn continuous casting of steel, the strand is cooled in the upper part of the secondary cooling zone with water sprayed by nozzles towards the strand surface. The water accumulates in the nip of the lower roll of a roll pair, forming a water pool which then drains off towards the ends of the roll. In the present work, open channel hydraulics was applied for computation of the water pool height in the nip between roll and strand in continuous slab casting. The differential equation describing the change of pool height for the spatially varied flow with increasing discharge was solved with the Runge–Kutta technique using as boundary condition the pool height at the end of the nip. The effects of the Manning friction factor n and the energy coefficient α were determined in sets of computation. It was shown that the hydraulic theory could predict water profiles in the nip of continuous casting rolls to a good approximation.