Effects of Varying Equivalence Ratios on the Combustion Efficiency Characteristic of a Dual-Fuel Compression Ignition Engine by Changing Intake Pressures and Exhaust Gas Recirculation Rates

Abstract

AbstractIn general, a leaner mixture condition improves combustion efficiency in compression ignition (CI) combustion using diesel. However, in the case of leaner air–fuel mixture conditions, it disturbs flame propagation in spark ignition combustion using gasoline, i.e., low reactivity fuel, causing a decrease in combustion efficiency. Since dual-fuel combustion in a CI engine typically involves the use of high- and low-reactivity fuels together, the differing reactivity conditions in the cylinder become as important as the local equivalence ratio in the cylinder. Thus, there is a need to verify the effect of a leaner mixture condition on combustion efficiency in dual-fuel CI combustion. For this reason, this study experimentally evaluates the effects of varying equivalence ratios on the combustion efficiency of gasoline/diesel dual-fueled CI combustion in a 0.4-L single-cylinder engine under low-speed (1500 rpm) and low-load (total LHV 570 J/str) conditions. To vary the equivalence ratios, intake pressures and exhaust gas recirculation (EGR) rates were, respectively, changed under the part-load condition. The results emphasize that as the equivalence ratio becomes leaner by increasing the intake pressure, combustion efficiency worsens due to the low reactivity properties and certain flame propagation modes of gasoline combustion. On the contrary, increasing the EGR rate did not significantly influence combustion efficiency, but it effectively helped reduce nitrogen oxide (NOx) emissions. Based on these results, it is concluded that optimizing dual-fuel CI combustion to suppress NOx emissions is better achieved using EGR, rather than creating a leaner mixture condition.