Microstructure evolution in bituminous-coal pyrolysis under in situ and stress-free conditions: a comparative study

Abstract

AbstractA self-made triaxial testing machine with thermal–hydraulic–mechanical–chemical (THMC) coupling and a tubular heating furnace, combined with in situ (IS) micro-computed-tomography technology was utilized in this study. The evolution of pore-fissure (PF) structure parameters (porosity, PF scale distribution, effective PF volume ratio, and permeability) of bituminous coal under stress-free (SF) and IS conditions with temperature was investigated, and then the mechanism of experimental results was analyzed. Results showed that (1) under SF conditions, at 300–550 °C, the coal samples after pyrolysis are dominated by elongated large fissures, with PF structure parameters positively correlating with temperature. After 400 °C, the number of PFs increases, with most PFs having equivalent diameter (R) ≤ 100 μm. (2) Under IS conditions, coal sample fissures are dominated by elongated large fissures at 300–350 °C and by holes at 350–600 °C. (3) Under IS conditions at 300–600 °C, the PF structure parameters of coal samples initially decrease with temperature and subsequently increase. The number of PFs fluctuates within a certain range, and the PF scale distribution dynamically shifts with temperature. (4) After 300 °C, the PF structure parameters of bituminous coal under SF and IS conditions show a bipolar distribution with temperature. Therefore, the weakening effect of stress on the PF structure of coal samples should not be overlooked during IS pyrolysis mining of coal bodies.