Precursors to rock failure in the laboratory using ultrasonic monitoring methods

Abstract

AbstractForecasting the occurrence of natural hazards, such as earthquakes or landslides, remain very challenging. These hazards are often caused by stress changes in the subsurface, therefore detecting and monitoring these changes can help the prediction and mitigation. Active ultrasonic transmission experiments were performed on Red Pfaelzer sandstones to investigate the monitoring and forecasting potential of these measurements. The sandstone samples were loaded until failure at different initial confining stress conditions. The forecasting potential to failure of different analysis methods, such as coda wave interferometry or wave attenuation, is investigated and compared. Our results show we can detect the forecast the upcoming failure of the samples from 40 to 70% of its failure point. Small differences between each analysis method are visible, but the trend of the signal is leading and therefore a robust prediction of failure can be made by combining analysis methods. In this paper, we propose a traffic light forecasting system using the precursory signals from ultrasonic monitoring. This system is applicable for monitoring failure at various depths and or stress conditions, for a better prediction of small stress-induced changes in the subsurface and thus mitigation of failure (natural hazards) in the subsurface.