Abstract
AbstractThe tapping process is one of the most widespread manufacturing processes for internal threads, usually carried out at the end of the value chain. Any non-compliance with required quality standards or even the destruction of the thread due to process uncertainty in the tapping process is therefore subjected to high rework costs. Possible process uncertainties in the tapping process can be triggered by synchronization errors between feed rate and spindle speed, axis offset, faulty core holes and wear of the tapping tool. In order to detect process uncertainties during tapping and thus provide a basis for initiating countermeasures, a sensor-integrated tap holder was developed. This paper presents the realized concept of a rotating telemetry unit for signal processing, data acquisition and wireless data transmitting via WiFi standard on basis of low-cost embedded systems. Furthermore, two unique sensor concepts for measuring close-to-tool vibrations and the axial length compensation of the tapping tool are shown. Based on the sensor data in combination with feature engineering methods, process uncertainty during tapping are detected.
Funder
deutsche forschungsgemeinschaft
Technische Universität Darmstadt
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Software,Control and Systems Engineering
Reference22 articles.
1. Ahn J, Lee D, Kim S, Kim H, Cho K (2003) Effects of synchronizing errors on cutting performance in the ultra-high-speed tapping. CIRP Ann 52(1):53–56. https://doi.org/10.1016/S0007-8506(07)60529-0
2. BILZ WERKZEUGFABRIK GmbH & Co. KG (2021) HFP-System. https://www.bilz.de/produkte/messtechnik-smarttools/prozessueberwachung-fuergewindebearbeitung/
3. Chen YB, Sha JL, Wu SM (1990) Diagnosis of the tapping process by information measure and probability voting approach. J Eng Ind 112(4):319–325. https://doi.org/10.1115/1.2899594
4. EMUGE-Werk Richard Glimpel GmbH & Co. KG (2021) Softsynchro3. https://www.emuge.com/sites/default/files/Emuge%20Softsynchro%20Brochure.pdf
5. Gil Del Val A, Fernández J, del Castillo E, Arizmendi M, Veiga F (2013) Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps. Int J Adv Manuf Technol 69(5-8):1273–1282. https://doi.org/10.1007/s00170-013-5078-7
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献