Author:
Li Lianjie,Xie Haibo,Zhang Tao,Pan Di,Li Xingsheng,Chen Fenghua,Liu Tianwu,Liu Xu,Liu Hongqiang,Sun Li,Jiang Zhengyi
Abstract
AbstractIntermediate roll shifting (IRS) is widely used for improving the strip shape in the six-high tandem cold mill, but most related studies are limited to a single stand. To fill the knowledge gap, a three-dimensional (3D) multi-stand elastic–plastic finite element (FE) model was developed for a continuously variable crown (CVC)-6 tandem cold mill using data transfer, which was then validated by industrial experimental results. Based on this FE model, the effects of the IRS on the strip crown, strip flatness, loaded roll gap profile and contact normal stress between rolls at each stand were quantitatively analysed. The results show that from Stand 1 (S1) to Stand 5 (S5), the regulation ability of the IRS on the strip crown shows a decreasing trend, which depends on the strip plastic rigidity; in contrast, the regulation ability on the quadratic flatness experiences an obvious increase from S1 to Stand 4 (S4), then a drop at S5, while the IRS exerts little effect on the quartic flatness and quartic crown of the loaded roll gap. Moreover, the most uniform distribution of contact normal stress emerges at different IRSs from S1 to S5. These findings can contribute to a better understanding of the role of the IRS in controlling the strip shape during tandem cold rolling (TCR).
Funder
HBIS Group
The University of Wollongong
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Software,Control and Systems Engineering
Reference33 articles.
1. Zhou ZQ, Lam Y, Thomson PF et al (2007) Numerical analysis of the flatness of thin, rolled steel strip on the runout table. Proc Inst Mech Eng B J Eng Manuf 221:241–254
2. Wang QL, Sun J, Li X et al (2020) Analysis of lateral metal flow-induced flatness deviations of rolled steel strip: mathematical modeling and simulation experiments. Appl Math Model 77:289–308
3. He AR, Shao J, Sun WQ (2016) Theory and practice of shape control. Metallurgical Industry Press, Beijing
4. Imai I (1980) New six-high mill (NHM) and automatic shape control system in cold rolling. In: International Conference on Steel Rolling, pp 807–818
5. Nakajima K, Asamura T, Kikuma T et al (1984) Hot strip crown control by six-high mill. Trans Iron Steel Inst Jpn 24:284–291
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献