The effect of surface finish and post-processing on mechanical properties of 17-4 PH stainless steel produced by the atomic diffusion additive manufacturing process (ADAM)

Abstract

AbstractThis study investigates the influence of surface finish and post-processing conditions on the mechanical properties of 17-4 PH stainless steel (SS) produced using the atomic diffusion additive manufacturing process (ADAM). Diverse sample orientations, including horizontal (0°), 30°, 60°, and vertical (90°), were examined, with selected samples undergoing post-processing through machining, polishing, and heat treatment. Tensile strength testing, surface roughness measurement, and hardness measurement were conducted to assess the effect of surface finish conditions and post-processing on mechanical properties. The results reveal significant variations in the tensile strength of the samples based on the build orientation (183.5 to 1034.5 MPa), and subsequent machining. Notably, post-built machining is found to enhance both the absolute ultimate tensile strength (UTS) and the isotropy of the material. Further improvements are attainable through heat treatment. A microstructure analysis, in conjunction with tensile testing outcomes, demonstrates the potential for refining the properties of ADAM-printed samples through suitable machining, heat treatment, and geometry modifications. This study identifies avenues for ongoing process development and outlines possibilities for enhancing mechanical properties of additive manufactured parts, particularly through ADAM process.