Author:
Mori Ken-ichiro,Suzuki Yasutaka,Yokoo Daisuke,Nishikata Michiya,Abe Yohei
Abstract
AbstractThe phase transformation and mechanical properties of non-quenchable steels partnered with the quenchable boron steel in hot stamping of tailor-welded blanks were evaluated to produce tailored components with partially balanced strength and ductility. The effect of the forming start temperature after natural air cooling on the phase transformation and mechanical properties for 270 MPa mild steel, non-quenchable steel, 440 MPa high strength steel, and 22MnB5 steel sheets was examined, and the 270 MPa and non-quenchable sheets had enough ductility after hot stamping. Tailored components having a hardness of about 500 HV1 in the high strength zone and a total elongation of about 30% in the high ductility zone were hot-stamped from a tailor-welded blank composed of 22MnB5 and 270 MPa sheets. It was found that the 270 MPa mild steel sheet is sufficient as a partner sheet of tailor-welded blanks. In addition, the safety of hot-stamped components was heightened by welding a 22MnB5 main blank with a 270 MPa steel patch. Even if the main blank is fractured by a collision, the hot-stamped component is not separated by the 270 MPa patch having high ductility.
Funder
Japan Society for the Promotion of Science
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Software,Control and Systems Engineering
Reference28 articles.
1. Billur E (2018) Chapter 1 Introduction. In: Billur E (ed) Hot stamping of ultra high-strength steels: From a technological and business perspective. Springer Nature, Cham, pp 1–18
2. Nakagawa Y, Mori K, Maeno T (2018) Springback-free mechanism in hot stamping of ultra-high-strength steel parts and deformation behaviour and quenchability for thin sheet. Int J Adv Manuf Technol 95(1-4):459–467. https://doi.org/10.1007/s00170-017-1203-3
3. Mori K, Abe Y, Sedoguchi K (2019) Delayed fracture in cold blanking of ultra-high strength steel sheets. CIRP Ann Manuf Technol 68(1):297–300. https://doi.org/10.1016/j.cirp.2019.04.111
4. Berglund D, Amundsson K, Hellgren LO (2008) Hot stamped components with "soft zones" for improved crashworthiness-simulation and validation of product performance. Int Deep Drawing Research Group Proc, Sweden, C/63/08
5. Merklein M, Wieland M, Lechner M, Bruschi S, Ghiotti A (2016) Hot stamping of boron steel sheets with tailored properties: a review. J Mater Process Technol 228:11–24. https://doi.org/10.1016/j.jmatprotec.2015.09.023
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献