Abstract
AbstractPremature failure of armoured face conveyor (AFC) chains due to corrosion is a significant proportion of the unplanned downtime experienced on longwall equipment. The AFC chains are constantly in contact with water and wet coal. The premature failure issue of AFC chains has become more prominent since the introduction of longwall top-coal caving with its additional AFC. Reverse osmosis (RO) is a popular water treatment method for reducing salinity and dissolved solids, but its impact on the corrosion of the AFC chains is unclear. This study has been commissioned to investigate the direct effects of RO water on the corrosion of AFC chains. An immersion test was carried out using AFC chain steel submerged in two water samples: untreated dam water and treated water from an RO treatment plant. Elemental analysis was conducted for both water samples, and four corrosion indices were measured for both water samples. The RO water more vigorously dissolves calcium carbonate scales leading to increased corrosion of the AFC chains although the dam water has much higher levels of calcium, chloride, sulphate, sodium, and magnesium. Bicarbonate ions are the main alkaline factor of water that provides the buffering capacity to acids. Decreased alkalinity without balancing other ions in water causes high corrosivity and decreased scaling tendencies.
Funder
Central Queensland University
Publisher
Springer Science and Business Media LLC
Subject
Materials Chemistry,Metals and Alloys,Mechanical Engineering,Geotechnical Engineering and Engineering Geology,General Chemistry,Control and Systems Engineering
Reference32 articles.
1. Zhao W, Qin C, Xiao Z, Chen W (2022) Characteristics and contributing factors of major coal bursts in longwall mines. Energy Sci Eng 10:1314–1327. https://doi.org/10.1002/ese3.1102
2. Guan Z, Gurgenci H (2004) Reliability improvement through smart longwalls project. CRCMining Conference, Noosa Head, Queensland, Australia
3. Stecula K, Tutak M (2017) Knowledge management and the costs of exploitations of machines. European scientific conference PEFnet. Brno, Czech Republic
4. Jangara H, Ozturk CA (2021) Longwall top coal caving design for thick coal seam in very poor strength surrounding strata. Int J Coal Sci Technol 8:641–658. https://doi.org/10.1007/s40789-020-00397-y
5. Nicolay T, Schmitt M, Blum A (2004) Telemetric chain link force measurement in coal mining armored face conveyors. IEEE SENSORS, Vienna, Austria