Author:
Khaled K. M.,Abdulhakim M.
Abstract
AbstractThis paper presents the design and evaluation of a Multi-function torque standard machine (MFTSM) capable of calibrating hydraulic torque wrenches, torque multipliers either concentric or nonconcentric up to 100 kN m, and torque transducers with regular or irregular bases up to 2.5 kN m, in clockwise and anticlockwise directions. The machine’s performance was evaluated through a series of calibrations and comparisons that revealed good consistency, as the En value tests are less than unity.
Funder
National Institute of Standards
Publisher
Springer Science and Business Media LLC
Subject
Physics and Astronomy (miscellaneous)
Reference24 articles.
1. C. Schlegel, D. Röske, D. Mauersberger and P. Hohmann, Metrological characterization of a 20 N·m torque calibration standard machine at (PTB), Germany. J. Phys. Conf. Ser., 1065 (2018) 42026. https://doi.org/10.1088/1742-6596/1065/4/042026.
2. D. Röske, Metrological characterization of a 1 N m torque standard machine at (PTB), Germany. Metrologia, 51(1) (2014) 87–96. https://doi.org/10.1088/0026-1394/51/1/87.
3. D. Adolf, K. Mauersberger, D. Peschel, Specifications and uncertainty of measurement of the PTB’s 1 kNm torque standard machine. In Proceedings of the 14th IMEKO TC3 conference, (1995) pp. 174–176.
4. A. Pusa, Torque calibration in Finland, (1996).
5. K. Ohgushi, T. Ota, K. Ueda, and E. Furuta, Design and development of 20 kN m deadweight torque standard machine. In 18th IMEKO TC3 conference force, mass torque, (2002) pp. 52–57.