Abstract
AbstractEffective and optimal hydrocarbon production from heterogeneous and anisotropic reservoirs is a developing challenge in the hydrocarbon industry. While experience leads us to intuitive decisions for the production of these heterogeneous and anisotropic reservoirs, there is a lack of information concerning how hydrocarbon and water production rate and cumulative production as well as water cut and water breakthrough time depend on quantitative measures of heterogeneity and anisotropy. In this work, we have used Generic Advanced Fractal Reservoir Models (GAFRMs) to model reservoirs with controlled heterogeneity and vertical and/or horizontal anisotropy, following the approach of Al-Zainaldin et al. (Transp Porous Media 116(1):181–212, 2017). This Generic approach uses fractal mathematics which captures the spatial variability of real reservoirs at all scales. The results clearly show that some anisotropy in hydrocarbon production and water cut can occur in an isotropic heterogeneous reservoir and is caused by the chance placing of wells in high-quality reservoir rock or vice versa. However, when horizontal anisotropy is introduced into the porosity, cementation exponent and grain size (and hence also into the permeability, capillary pressure, water saturation) in the reservoir model, all measures of early stage and middle stage hydrocarbon and water production become anisotropic, with isotropic flow returning towards the end of the reservoir’s lifetime. Specifically, hydrocarbon production rate and cumulative production are increased in the direction of anisotropy, as is water cut, while the time to water breakthrough is reduced. We found no such relationship when varying vertical anisotropy because we were using vertical wells but expect there to be an effect if horizontal wells were used.
Publisher
Springer Science and Business Media LLC
Subject
General Chemical Engineering,Catalysis
Reference40 articles.
1. Ababou, R.: Random porous media flow on large 3-D grids: numerics, performance, and application to homogenization. In: Environmental Studies, pp. 1–25. Springer, New York (1996)
2. Ahmedi, P., Ghandi, E., Riazi, M., Malayeri, M. Experimental and CFD studies on determination of injection and production wells location considering reservoir heterogeneity and capillary number. In: Oil & Gas Science and Technology—Rev. IFP Energies Nouvelles 74, 4 (2019)
3. Ali, Z.A., Al-Qassab, H.M.: Optimizing simulation models by upscaling from integrated reservoirs models: a case history. Paper SPE. 59448, 25–26 (2000)
4. Al-Qassab, H.M., Fitzmaurice, J., Al-Ali, Z.A., Al-Khalifa, A., Aktas, G.A., Glover, P.W.J.: Cross-discipline integration in reservoir modeling: the impact on fluid flow simulation and reservoir management. Proc. SPE Ann. Tech. Conf. Exhib. 2000, 27–38 (2000)
5. Al-Zainaldin, S., Glover, P.W.J., Lorinczi, P.: Synthetic fractal modelling of heterogeneous and anisotropic reservoirs for use in simulation studies: implications on their hydrocarbon recovery prediction. Transp. Porous Media 116(1), 181–212 (2017)
Cited by
17 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献