Influence of reservoir lithology on porous flow resistance of gas-bearing tight oil reservoirs and production forecast

Abstract

AbstractThe release of dissolved gas during the development of gas-bearing tight oil reservoirs has a great influence on the effect of development. In this article, the high-pressure mercury intrusion experiment was carried out in cores from different regions and lithologies of the Ordos Basin and the Sichuan Basin. The objectives are to study the microscopic characteristics of the porous throat structure of these reservoirs and to analyze the porous flow resistance laws of different lithology by conducting a resistance gradient test experiment. A mathematical model is established and the oil production index is corrected according to the experiment results to predict the oil production. The experimental results show that for tight reservoirs in the same area and lithology, the lower the permeability under the same back pressure, the greater the resistance gradient. And for sandstone reservoirs in different areas, the resistance gradients have little difference and the changes in the resistance coefficients are similar. However, limestone under the same conditions supports a much higher resistance gradient than sandstone reservoirs. Furthermore, the experimental results are consistent with the theoretical analysis indicating that the PVT (pressure–volume-temperature) characteristics in the nanoscale pores are different from those measured in the high-temperature, high-pressure sampler. Only when the pressure is less than a certain value of the bubble point pressure, the dissolved gas will begin to separate and generate resistance. This pressure is lower than the bubble point pressure measured in the high-temperature and pressure sampler. The calculation results show that the heterogeneity of limestone reservoirs and the mismatch of fluid storage and flow space will make the resistance, generated by the separation of dissolved gas, have a greater impact on oil production.