Abstract
AbstractThe optimization of drilling parameters is crucial for resolving the drilling problems in low-pressure and leaky formations using the annulus aerated dual gradient drilling technology. However, the previous studies have mostly focused on engineering applications and wellbore fluid flow models, with less emphasis on parameter optimization. This paper combines the wellbore multiphase flow model with genetic algorithms for the first time, proposing a key parameter optimization method for annulus aerated dual gradient drilling based on genetic algorithms. The study investigates the impact of selection operators on the performance of genetic algorithms and compares genetic algorithms with PSO algorithm and SAA. The results indicate that the convergence and stability of genetic algorithms can be improved by enhancing the selection operators. Compared to the gas–liquid ratio parameter optimization method, the IRSGA optimization method reduces the cost coefficient by 36.46%. Through comparative analysis of different optimization methods, the IRSGA demonstrates over 95% accuracy in large-scale computations. The research findings contribute to the optimization of parameters design under low-cost conditions and are of significant importance for promoting the use of this technology to address the serious issue of lost circulation in drilling technology.
Funder
China National Key Research and Development Project
Publisher
Springer Science and Business Media LLC
Reference23 articles.
1. Chande SV, Sinha M (2013) Genetic algorithm: a versatile optimization tool. Bvicams Int J Inf Technol 1:7–13
2. Dou L, Li G, Shen Z, Wu C, Liu W (2013) Technological design and parametric analysis of annular aerated drilling. China Petrol Mach 41(2):14–19
3. Gonzalez F, Franco R, Rodriguez R, Gamez G, Blas B, Vasquez J, Alcudia H (2013) Successful application of concentric casing nitrogen injection to overcome drilling challenges and deliver a record horizontal well in the tecominoacan field. In: SPE/IADC drilling conference: Amsterdam, The Netherlands. https://doi.org/10.2118/163494-MS
4. Guo B, Rajtar JM (1995) Volume requirements for aerated mud drilling. Spe Drill Complet 10(3):165–169. https://doi.org/10.2118/26956-PA
5. Hasan AR, Kabir CS (1986) A Study of multiphase flow behavior in vertical oil wells: Part I - theoretical treatment. In: SPE California regional meeting. society of petroleum engineers: Oakland, California.