Mechanical analysis on cement sheath integrity under asymmetric load

Abstract

AbstractIn large-scale multi-section hydraulic fracturing, the stress environment of wellbore is extreme complex, often causing the unbalanced stress distribution around the wellbore. That poses great challenges to the integrity of the sheath. In this paper, firstly, triaxial compression test and triaxial cyclic test are carried out at 130 °C to study the deformation characteristics of the cement under high temperature. Then based on that, an appropriate plastic mechanics model is established. Finally, the shakedown theory is applied to analyze the model and acquires a maximum cyclic loading under asymmetric stress. The result shows that (1) the well cement, with the increase of load, shows the plastic flow characteristics and can be regarded as an ideal elastic–plastic material under high temperature. (2) During the cyclic loading and unloading process, the "hysteresis loop" becomes denser, which indicates that the accumulation rate of plastic deformation is continuously declining. The main plastic strain appears in the phase of the first loading. (3) The external pressure Pz plays a positive role in the deformation control of the sheath. With the growth of Pz, the maximum cyclic loading Pmax will also increase. (4) Asymmetric stress distribution can significantly affect the bearing capacity of the sheath. If stress difference coefficient λ = 0.3, the Pmax tends to decrease nearly by 50%. With the growth of λ, the negative influence of stress asymmetry reduces gradually. High external pressure is beneficial to reduce the negative impact of the asymmetry. With the growth of λ, the benefit tends to enhance. (5) In engineering practice, if the geology around wellhole showcases the strong asymmetry (the value of λ is large), some steps need to be adopted to reduce the stress concentration.