Factors influencing hydrogen peroxide decomposition dynamics for thermochemical treatment of bottomhole zone

Abstract

AbstractRecently, interest in on-site heat generation has increased due to injection of thermochemical fluids as a complex effect on well productivity. The method of thermochemical treatment with H2O2 while restoring and increasing the filtration characteristics of the bottomhole formation zone is a relatively new and insufficiently studied technology. The article discusses the key factors affecting the exothermic decomposition of this fluid when this fluid is injected into the well. The heat effects, pressure growth and decomposition time of H2O2 were determined depending on the salinity of the water, the composition of terrigenous rock, and various concentrations of H2O2. Physical 1-D modeling of H2O2 injection was carried out on rock models with mobile and stationary oil, which demonstrated a sharp increase in temperature by 100–240 °C caused by the decomposition of H2O2 due to the catalyst and the presence of catalytic active sites in the rock. As a result of this thermochemical treatment, the rock was partially cleaned of immobile oil and heavy sediments. Injection of H2O2 with a catalyst has shown the effectiveness of displacement of mobile oil from the filled sand model. Thus, the results of this study can provide a preliminary assessment of the effectiveness of H2O2 thermochemical treatment in fields operated at a later stage of development.