Reactive transport modeling of scale precipitation and deposition during incompatible water injection in carbonate reservoirs

Abstract

AbstractSeawater injection is an efficient enhanced oil recovery (EOR) method that capitalizes on the chemical composition differences between the injecting seawater and in-situ formation water, which leads to physicochemical interactions between the rock and fluids. These rock and fluid interactions result in changes of rock wettability and subsequent improved microscopic sweep efficiency. However, the ion imbalance resulting from seawater injection and its incompatibility with the in-situ formation water may interfere with the rock and fluids equilibrium state, causing scale precipitation and subsequent deposition which can negatively impact rock quality, well productivity and reservoir performance. In this study, an accurate, robust, and general approach is presented by coupling a geochemical module with a compositional two-phase fluid flow model to handle reactive transport in porous media. The proposed coupled model, so-called ad-scale model, is capable of simulating carbonate rock dissolution and sulfate scale formation/deposition for evaluating reservoir performance under incompatible water injection. The model predictions were validated using experimental data. This model was also utilized to predict water injection rate into a carbonate formation. It was obtained that both the reacting and non-reacting component profiles were accurately predicted using the proposed coupled model. The water injection rate prediction was also validated and showed high accuracy with absolute error and coefficient of determination values of 9.02% and 0.99, respectively. In addition, a sensitivity analysis was performed on water composition, which showed a strong dependence of reservoir and well performance on water composition. Graphical abstract This diagram elucidates what exactly happens during incompatible water injection in the mixing zones near the injection well (right half of the figure) or production well (left half of the figure) where most of the geochemical phenomena occur.