Analysis of the influence of joint direction on production optimization in enhanced geothermal systems

Abstract

AbstractHeat extraction from geothermal reservoir by circulating cold water into a hot rock requires an amount of fluid pressure, which is capable of inducing fault opening. Although stress change promotes the potential of fault failure and reactivation, the rate at which fluid pressurization within the fault zone generates variations in pore pressure as fault geometry changes during geothermal energy production have not been thoroughly addressed to include the effects of joint orientation. This study examines how different fault/joint models result in different tendency of injection-induced shear failure, and how this could influence the production rate. Here, a numerical simulation method is adopted to investigate the thermo-hydro-mechanical (THM) response of the various fault/joint models during production in a geothermal reservoir. The results indicate that pore pressure evolution has a direct relationship with the evolution of production rate for the three joint models examined, and the stress sensitivity of the individual fault/joint model also produced an effect on the production rate. Changing the position of the injection well revealed that the magnitude of shear failure on the fault plane could be controlled by the hydraulic diffusivity of fluid pressure, and the production rate is also influenced by the magnitude of stress change at the injection and production wells. Overall, the location of the injection well along with the fault damage zone significantly influenced the resulting production rate, but a more dominating factor is the joint orientation with respect to the maximum principal stress direction. Thus, the rate of thermal drawdown is affected by pore pressure elevation and stress change while the fault permeability and the production rate are enhanced when the joint’s frictional resistance is low.