Bending performance of cross-laminated timber constructed from fibre-managed Eucalyptus nitens under short-term and long-term serviceability loads

Author:

Liang YingweiORCID,Taoum AssaadORCID,Kotlarewski NathanORCID,Chan AndrewORCID

Abstract

AbstractCross-laminated timber (CLT) has become a notable building material due to its structural efficiency, reliability and sustainability. In this study, the bending performance of three-layered CLT constructed from fibre-managed Eucalyptus nitens (E. nitens) was investigated under short-term and long-term loadings. Linear-elastic four-point bending testing was used to determine the maximum serviceability loading capacity before they reached the suggested deflection limits. A pilot study was conducted to investigate the creep behaviour of E. nitens CLT through long-term bending tests in a controlled environmental room. The study suggested that E. nitens CLT has higher serviceability loading capacity and lower creep ratio compared to CLT made from strength-class C24 spruce. The investigations of various configurations of E. nitens CLT panels based on structural grades implemented in top, cross, and bottom layers have revealed different short-term and long-term bending performances. The grade of transverse layers has been found to be the most important factor in improving the bending creep performance of E. nitens CLT. Two modelling equations were employed to perform curve fitting on the experimental creep ratio with time. The conventional power-law modelling tends to underestimate the longer-term creep ratio when compared to a recently developed nonlinear regression modelling equation that takes environmental conditions into account. The mean estimated creep ratio after 50 years was 1.77 for E. nitens CLT, and 1.89 for the C24 spruce CLT. The present study is a pilot investigation to increase the understanding of performance of the newly developed CLT made from fibre-managed plantations E. nitens, with particular emphasis on its creep behaviour. The results of this study provide valuable contributions for future research in this field, and ongoing commercial production of E. nitens CLT.

Funder

University of Tasmania

Publisher

Springer Science and Business Media LLC

Reference44 articles.

1. ANSI/APA PRG 320–2018 (2018) Standard for performance-rated cross-laminated timber. American National Standards Institute, New York, America

2. AS 1720.1 (2010) Timber structures - Part 1: Design methods Standard Australia, Sydney, Australia

3. AS 1080.1 (2012) Timber - methods of test moisture content. Standards Australia, Sydney, Australia

4. AS 2082 (2007) Timber - hardwood - visually stress-graded for structural purposes. Standards Australia, Australia

5. AS/NZS 4063.1 (2010) Characterisation of structural timber Test methods Standards Australia/Standards New Zealand, Sydney, Australia and Wellington, New Zealand

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3