Abstract
AbstractThe experimental results of the study focused on the effect of drying processes of modified air drying and warm air-steam mixture drying of pine and beech wood on the size of sawdust particles created in cutting using PRW-15M sash gang saw, are presented in the paper. Particle size analysis of dry sawdust was performed using two methods—sieving method and laser diffraction analysis. The results showed that the drying process did not affect the general particle size distribution of the sawdust, but the content of very fine dust particles in beech wood sawdust is many times higher when the beech wood was dried in the warm air-steam mixture drying process and sawn at a feed per tooth of 0.105 mm.
Funder
Ministerstwo Nauki i Szkolnictwa Wyższego
Narodowe Centrum Nauki
Poznan University of Life Sciences
Publisher
Springer Science and Business Media LLC
Subject
General Materials Science,Forestry
Reference39 articles.
1. Aro MD, Geerts SM, French S, Cai M (2019) Particle size analysis of airborne wood dust produced from sawing thermally modified wood. Eur J Wood Prod 77(2):211–218. https://doi.org/10.1007/s00107-019-01385-z
2. Baran S, Teul I (2007) Wood dust: An occupational hazard which increases the risk of respiratory disease. J Physiol Pharmacol 58(Suppl 5):43–50
3. Baranski J, Klement I, Vilkovská T, Konopka A (2017) High temperature drying process of Beech Wood (Fagus sylvatica L.) with different zones of sapwood and red false heartwood. BioRes 12(1):1861–1870. https://doi.org/10.15376/biores.12.1.1861-1870
4. Baranski J (2018) Moisture content during and after high- and normal-temperature drying processes of wood. Dry Technol 36(6):751–761. https://doi.org/10.1080/07373937.2017.1355319
5. Beljo-Lučić R, Čavlović AO, Jug M (2011) Definitions and relation of airborne wood dust fractions. In: 4th International Scientific Conference-WOODWORKING TECHNIQUES, September 7–10, 2011, Prague, Czech Republic, 25–32
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献