An alternative method for predicting internal friction angle of rock materials

Abstract

AbstractThe shear strength properties of rock materials, cohesion and internal friction angle, are determined by carrying out tri-axial strength test on cylindrical core specimens in laboratory. But determination of these parameters by triaxial tests in accordance with standards and suggested methods, particularly for weak, fractured and weathered rocks is exteremely difficult and/or impossible due to difficulties related to preparation of test specimens suitable for this test. In addition, the tri-axial test requires high cost equipment and too much time for sample preparation and testing. In such cases, there is a need to precisely estimate the friction angle and estimation of rock shear strength properties using some indirect methods, as they are economical and easy to carry out. In this study, the traditional method, which is recommended to be used for the prediction of internal friction angle (ϕ) when triaxial test data is not available, was briefly assessed with its some limitations and an alternative method using theoretical tensile strength and uniaxial compressive strength to predict ϕ was proposed. Then the prediction performances of traditional and proposed methods were compared using a very large data set collected from published literature. The statistical reliability of the derived equations was assessed using F- and t-tests and according to the test results the prediction equations were found to be statistically reliable. The results indicated that the method proposed in this study using the theoretical tensile strength yields best predictions of ϕ when compared to those estimated from the traditional methods based on direct and Brazilian tensile strength values.