Abstract
AbstractBananas were examined starting from ripening stage R2 (green) to stage R7 (overripe), to identify suitable non-invasive, real time in-situ technologies to separate the ripening stages: (1) Chlorophyll degradation, measured by the DA meter, decreased from ca. 2.1 (R2) to 0.2 IAD units (R7), i.e. tenfold decline. (2) Colour CIE-Lab a values dramatically increased as indication of chlorophyll breakdown and enable differentiation between all ripening stages R2 to R7. Colour angles declined from 98.7° hue (R2), 97.3° hue (R3), 92.7° hue (R4), 89.4° hue (R5); 87.5° hue (R6) until 82.0° hue (R7). (3) Spectroscopy showed two light reflectance troughs at 494 nm and 679 nm. A novel banana ripening index (BRI) was developed and is proposed to identify and distinguish the ripening stages of banana with values starting at 4 at R1 and peaking at 8.1 at ripening stage R7. (4) Peel gloss increased from stage R2 (150 a.u.) to stage R7 (220 a.u.) in the order of ca. 50% followed by a subsequent decrease thereafter. (5) Peel softening declined as fruit firmness dropped from 82 Shore at stage R2 to 42 Shore at stage R7 (overripe), measured also at the centre of the banana fruit. (6) After a constant 90.5% water content per fresh mass (FM) in the banana peel until stage R5, the subsequent drop to 82.9% FM at R7 and 7.6% water translocation viz displacement from the peel to pulp explained this softening. All the above results identified the fruit centre (rather than the tip) as a suitable candidate due to the most advanced ripening and least curved surface region of the fruit with easy access, when a carton is opened and the hands become accessible. This novel approach based on a comparison has shown the DA-meter, colorimeter and spectrometer as suitable candidates for the identification of each ripening stage. The combination of these three devices may be suitable for monitoring of banana ripening rooms in terms of temperature and humidity in addition to the present, colour-based ripening scale.
Funder
Rheinische Friedrich-Wilhelms-Universität Bonn
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Safety, Risk, Reliability and Quality,General Chemical Engineering,Food Science
Reference19 articles.
1. N. Hashim, S.E. Adebayo, K. Abdan, M. Hanafi, Comparative study of transform-based image texture analysis for the evaluation of banana quality using an optical backscattering system. Postharvest. Biol. Technol. 135, 38–50 (2018)
2. P.M. Kotecha, B.B. Desai, Bananas, in Handbook of Fruit Science and Technology: Production, Composition, Storage and Processing. ed. by D.K. Salunkhe (Taylor & Francis, Abington, 1995), pp. 67–88
3. K.L. Yam, S.P. Papadakis, A simple digital imaging method for measuring and analysing colour of food surfaces. J. Food Eng. 61, 137–142 (2003)
4. G. Ward, A. Nussinovitch, Peel gloss as a potential indicator of banana ripeness. LWT Food Sci. Technol. 29, 289–294 (1996)
5. T. Ringer, L. Damerow, M. Blanke, Non-invasive differentiation of surface features of banana during ripening. J. Food Sci. Technol. 55(10), 4197–4203 (2018). https://doi.org/10.1007/s13197-018-3352-2
Cited by
18 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献