Hybrid model for exhaust systems in vehicle thermal management simulations

Abstract

AbstractUsing Vehicle Thermal Management (VTM) simulations to predict the thermal load experienced by components is a popular method within the automotive industry. The VTM simulation approach is fast becoming equivalent to conducting thermal load tests with prototypes for vehicles powered by internal combustion engines. This is especially true in the early development phase of the vehicle. The accuracy of the VTM simulations plays a pivotal role at them being accepted as an eventual replacement for physical testing. The correct prediction of thermal loads in VTM simulations depends on a multitude of different parameters, but the modelling of the exhaust system plays a central role in it. This is because the exhaust gas, and with it the exhaust system, is the primary source of heat in a vehicle powered by an internal combustion engine. The developed approach not only needs to be accurate but also modular enough to allow for different exhaust configurations to be tested. It also needs to be capable of integration into any VTM simulation workflow while maintaining an industrially acceptable turnaround time. This paper explores a new methodology to achieve these requirements. A 1D/3D hybrid approach to exhaust system modelling is presented. In this, the components that have an enthalpy change of the exhaust gas, such as the turbocharger, have been modelled as 1D and simple components such as pipes have been modelled in 3D. This has the advantage of combining the speed of 1D simulations with the spatial accuracy of 3D simulations. The method uses a unique three-code co-simulation technique for full vehicle VTM simulations. The coupling is between a 3D CFD software, a 1D simulation tool, and a Finite Element based thermal solver. The methodology was validated against experimental data for multiple loadcases. The results show good agreement with experiment within acceptable tolerances.