Geochemical Evaluation of Manganese Neutralization Sludge for Mn-Containing Mine Drainage Treatment

Abstract

AbstractConventional neutralization treatment for manganese (Mn)-bearing mine drainage provides a challenge of cost-efficiency, and new approaches should be explored for efficient removal of Mn. We focused on Mn neutralization sludge, a by-product of the Mn-bearing drainage treatment process, which was assumed to be useful as a water purification material. Mn and zinc (Zn) removal tests in simulated drainage were performed using Mn neutralization sludge, and the reaction mechanism was elucidated using geochemical modeling and X-ray absorption fine structure (XAFS) analysis. The results showed that the addition of sludge enabled to lower the Mn and Zn concentration below Japanese effluent standard (10 mg dm−3 for Mn; 2 mg dm−3 for Zn) within 1 h. Furthermore, heavy metal immobilization was achieved at neutral pH (7–8) with the sludge addition, while the conventional neutralization process without adding the sludge requires higher pH (>10) to lower Mn concentration. These removal behaviors were not explainable by considering only well-known phenomena: hydroxide precipitation, surface complexation reaction onto δ-MnO2, and autocatalytic Mn oxidation. Hence, we advanced the geochemical model for simulation, suggesting that a surface complexation reaction onto γ-MnOOH greatly contributed to the removal of Mn. Besides, Zn was calculated to be predominantly precipitated as ZnMn2O4. Solid residue analysis by XAFS measurement supported the result of above calculation, validating the reliability of the constructed geochemical model. Overall, we concluded that the advanced geochemical model would be useful in predicting the Mn and Zn behavior during mine drainage treatment with Mn neutralization sludge. Graphical abstract