Preparation of bulk micro–mesoporous silica-supported ZnO via silicic acid as a desulfurizer

Abstract

AbstractSilicic acid solution, which is prepared from water glass followed by extraction with tetrahydrofuran (THF), is focused on an environmentally friendly and inexpensive source of silica. In this study, we aimed the preparation of bulk porous silica with low environmental impact and cost, and desulfurization of its supported ZnO was investigated. Bulk porous silica was prepared by the condensation of silicic acid/THF in the presence of Pluronic P123. Suitable condition was investigated for the formation of crack-free bulk body with high surface area and reproducibility under the molar ratio of H2O/Si and Si/Pluronic P123 on 121 and 100, respectively. From nitrogen adsorption–desorption measurements, this bulk porous silica was categorized into micro–mesoporous silica. Moreover, Pluronic P123 was extracted and recycled. Bulk porous silica-supported 15 wt% ZnO was prepared by the impregnation of ZnCl2 followed by calcination in air. The desulfurization ability was 8.7 mg/g. Graphical Abstract