Optimal design of fuzzy-PID controller for automatic generation control of multi-source interconnected power system

Abstract

AbstractThis paper suggests a fuzzy logic controller (FLC) structure from seven membership functions (MFs) and its input–output relationship rules to design a secondary controller to reduce load frequency control (LFC) issues. The FLC is coupled to a proportional–integral–derivative (PID) controller as the proposed FPID controller, which is tuned by an optimized water cycle algorithm (WCA). The proposed WCA: FPID scheme was implemented with two models from the literature under the integral time absolute error cost function. Initially, a two-area non-reheat unit was implemented, and the gains of PID and FPID controllers were adjusted to verify the suitability of WCA in solving LFC issues. Then, in order to identify the robustness of the closed-loop system, sensitivity analysis is carried out. Additionally, a two-area non-reheat unit was tested under the governor dead band nonlinearity. To guarantee the suitability of the proposed FPID controller, a model with a mixture of power plants, such as reheat, hydro, and gas unit in each area was carried out with and without the HVDC link, which can increase practical issues with LFC. The proposed controller's robustness was studied for all models under numerous scenarios, step load perturbations (SLP), and different objective functions. Simulation results proved that the proposed FPID controller provided superior performance compared to recently reported techniques in terms of peaks and settling time.