Nonlinear modeling of the ten-story RC building at E-Defense (2015): assessment with different modeling assumptions

Author:

Di Domenico Mariano,Gaetani d’Aragona MarcoORCID,Polese Maria,Magliulo Gennaro,Prota Andrea,Verderame Gerardo M.,Kajiwara Koichi

Abstract

AbstractTwo models of the 10-story reinforced concrete building tested at E-Defense laboratory in 2015 are built: the F model, in which nonlinear behavior is distributed over the element length, and the H model, in which nonlinear behavior is lumped in plastic hinges with a moment-chord rotation response assigned based on empirical formulations proposed in the literature. Nonlinear time–history analyses are performed to reproduce the experimental shaking-table tests performed at increasing seismic intensity level. The incremental experimental test has been performed twice: the first time (BS test), the structure base was free to slip on a concrete base fixed to the shaking table. After the BS test, a second test was performed on the same structure with the foundation fixed to the concrete base (BF test). Both tests are simulated for both models. When simulating both the BS and BF tests, the seismic input adopted for the numerical analyses is the displacement time-history registered at the base of the specimen’s columns, in order to implicitly account for base slip through the input signal without explicitly modeling the slipping devices. It is observed that the significant damage experienced by the specimen during the runs of BF tests at medium–high seismic intensity is probably triggered by softening and damage of beam-column joints: this is reproduced also by H numerical model and highlights the influence of beam-column joints on the overall seismic response of the structure. In general, it is observed that both numerical models, which were constructed, based on experimental data, only by adopting available and well-established tools proposed in the literature, can reproduce the overall response of the case-study structure, especially in terms of maximum top displacement demand and maximum damage state for structural members, provided that beam-column joints’ contribution is adequately considered.

Funder

Università degli Studi di Napoli Federico II

Publisher

Springer Science and Business Media LLC

Subject

Geophysics,Geotechnical Engineering and Engineering Geology,Building and Construction,Civil and Structural Engineering

Reference60 articles.

1. Alath S, Kunnath SK (1995) Modeling inelastic shear deformation in RC beam-column joints. In: Engineering mechanics proceedings of 10th conference, May 21–24, ASCE, Boulder, CO, USA, pp 822–825

2. Architectural Institute of Japan (AIJ 2010) AIJ standard for structural calculation of reinforced concrete structures (in Japanese)

3. ASCE/SEI 41-17 (2017) Seismic rehabilitation of existing buildings. American Society of Civil Engineers, Reston, VA

4. Celik OC, Ellingwood BR (2008) Modeling beam-column joints in fragility assessment of gravity load designed reinforced concrete frames. J Earthq Eng 12(3):357–438

5. Chang GA, Mander JB (1994) Seismic energy based fatigue damage ananlysis of bridge columns: part 1—evaluation of seismic capacity, NCEER technical report no. NCEER-94-0006. State University of New York, Buffalo, N.Y.

Cited by 5 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3