Abstract
AbstractThe aim of this study is to analyze how the fatigue behavior of AlSi10Mg by laser powder bed fusion is affected by build orientation, heat, and surface treatments. A three-by-three factorial plan has been arranged for this purpose. Particularly, regarding the heat treatment, three levels were considered (as built, age hardening, and stress relief); whereas, for the surface treatment, three levels were investigated (micro-shot-peening, micro-shot-peening plus fine blasting, and machining and lapping following laser powder bed fusion). Regarding the build orientation, the specimens were manufactured using three different build orientations (0°, 45°, and 90°). The obtained data have been statistically analyzed by a three-factor ANOVA-based method. The results, supported by fractographic and micrographic microscopy analyses, indicate that the age-hardening treatment yields the maximum benefits, whereas stress relief may even have a detrimental effect. As for surface treatments, a positive influence of shot-peening has been found.
Funder
Alma Mater Studiorum - Università di Bologna
Publisher
Springer Science and Business Media LLC
Reference56 articles.
1. Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.012
2. Banadaki Y, Razaviarab N, Fekrmandi H, Sharifi S (2020) Toward enabling a reliable quality monitoring system for additive manufacturing process using deep convolutional neural networks, pp 1–8. http://arxiv.org/abs/2003.08749
3. Ilani MA, Banad YM (2024) Modeling melt pool geometry in metal additive manufacturing using Goldak’s semi-ellipsoidal heat source: a data-driven computational approach. https://arxiv.org/abs/2404.08834v1
4. Abe F, Osakada K, Shiomi M, Uematsu K, Matsumoto M (2001) The manufacturing of hard tools from metallic powders by selective laser melting. J Mater Process Technol 111:210–213. https://doi.org/10.1016/S0924-0136(01)00522-2
5. Bourell DL, Beaman JJ, Leu MC, Rosen DW (2009) A Brief History of Additive manufacturing and the 2009 roadmap for additive manufacturing: looking back and looking ahead, US Turkey workshop on rapid technologies, Rapid Technol 5–11