Characterization of flexural fatigue behaviour of additively manufactured (PBF–LB) gyroid structures

Abstract

AbstractAdditive manufacturing (AM) holds remarkable potential for producing cellular materials with intricate structures and tailored mechanical properties. The study investigates the flexural fatigue behaviour of additively manufactured triply periodic minimal surface (TPMS) gyroid structures using laser powder bed fusion (PBF–LB) technique. The fatigue properties, especially the bending fatigue properties, of additively manufactured cellular structures are not well understood to date. The research aims to enhance understanding of bending fatigue in complex cellular geometries and assess the suitability of rotating bending tests. The PBF–LB process parameters were modified to study their impact on the specimen’s fatigue properties. The modified parameters led to increased surface roughness but significantly improved fatigue behaviour. This enhancement is attributed to a reduction in build defects, namely pores and finer grain size in thin-walled structures. The study also includes analysis of microstructure, hardness, surface roughness, and porosity of the specimens. The results indicate that optimizing process parameters for thin walled cellular structures can lead to substantial improvements in fatigue strength, at the expense of increased surface roughness. This finding offers practical insights for applications in which a rough surface finish may not be critical or even intentionally desired by the application. The research contributes to the understanding of additive manufacturing, cellular structures, and material testing, with potential implications for materials science and engineering applications.