Shape/penetration analysis and comparisons of isolated spray plumes in a multi-hole Diesel spray

Abstract

AbstractFuel injection systems significantly impact the combustion process and play a key role in reducing harmful exhaust emissions in internal combustion engines. For dual-fuel (DF) engines operating in gas mode, ignition of the main fuel is typically controlled by directly injected liquid pilot fuel. Liquid pilot fuel’s initial penetration and total mass considerably impact exhaust emissions and combustion stability. We investigated the spray morphology of a multi-hole diesel fuel injector within a constant-volume spray chamber using high-speed shadowgraphy and Mie-scattering measurements. Two methodologies were employed. The first one utilized a nozzle equipped with a thimble structure to isolate a single plume. The second methodology known as plume-blocking, involved sealing the orifices of the multi-hole nozzle to generate a single-spray plume. Our findings revealed that the plume-blocking approach demonstrated greater penetration than the thimble-equipped nozzle. The rapid penetration of this method may restrict its applicability to single-spray studies. Sprays generated from this partially sealed nozzle exhibited noticeable disparities compared to an unblocked nozzle, whereas a nozzle equipped with a thimble produced similar outcomes to the standard nozzle. The orifices when sealed, modify the flow distribution within the sac volume, which consequently affects the spray characteristics. In summary, this research provides insights into the impacts of various plume isolation methods on spray morphology, thereby enhancing the understanding of spray behaviour in transient conditions by comparing plume variations and disturbances under various fuel pressure and ambient conditions.