Effect of Pore Pressure on Strain Rate-Dependency of Coal

Abstract

AbstractViscoelastic strain rate-dependent behaviour of coal is critical in several subsurface engineering applications especially coal seams gas production. Such rate dependency is controlled by the interaction between coal bulk and gas sorption (a sorbing gas) or gas pressure (a non-sorbing gas). Despite the research conducted to date, the gas pressure effect (non-sorbing) on the viscous behaviour of sediments in particular coal remains unexplored. We, therefore, investigate the strain rate-dependent mechanical behaviour of coal under isotropic loading to specifically explore the effect of gas pressure (Helium) on its rate dependency eliminating the sorption effect. We perform a set of triaxial experiments on coal specimens at dry and pressurised gas (Helium) conditions under different strain rates under isotropic loading. The experimental results show that all coal specimens have viscoelastic strain rate dependency at a dry condition where viscous effect increases with strain rate. As a result, the bulk modulus of the specimens increases with the increase in strain rates. This strain rate dependency response, however, reduces with an increase in pore pressure and vanishes at a certain pore pressure under the same effective stress to that of dry specimens. We further employ X-ray micro-Computed Tomography (XRCT) to 3D scan a coal specimen saturated with Krypton gas undergoing different loading rates to shed light on the micro-mechanisms of gas pressure effect on specimens’ rate dependency. The XRCT results show that gas can be trapped in small-scale fractures and pores during the loading process leading to a localised undrained response that can stiffen the specimen and reduce its ability to show viscous rate dependency. The obtained results are significant in optimizing coal seam gas production and coal seam gas drainage applications.