Constant-Head Step-Injection Tests Using a Conventional Straddle-Sliding-Packer System for Investigating the Shear Capabilities of Minor Faults

Abstract

AbstractLow-permeability rock is suitable as the host rock of an underground repository for radioactive waste disposal; however, minor faults might develop there. Investigating the shear capability (= shear compliance) of those faults is crucial because they could be elastically sheared by the thermal effect of the waste to damage the waste’s engineered barriers. This study performed constant-head step-injection tests along with a recently developed packer-pressure-based extensometer method for assessing the applicability of this method to investigate the shear capability of minor faults. Herein, two neighboring minor faults (A and B) in siliceous mudstone were evaluated. The results showed that fault A, with centimeter-thick fault breccia, exhibited high shear capability, whereas fault B, with millimeters or less-thick fault breccia, displayed low shear capability despite containing an incohesive fault rock. An elastic shear displacement occurred for fault A during injection and reached 15–66 mm when the test-section pressure increased from 4.1 to 4.3 MPa. Here, the shear capability was 101 mm/MPa or more. Conversely, fault B had cohesion, and no shear displacement was detected even when the test-section pressure increased from 4.0 to 6.0 MPa. In this case, the shear capability was 10−1 mm/MPa or less. The estimated shear capabilities were consistent with the results from previous shear experiments, and therefore, the applied method helps investigate the shear capabilities of minor faults.