Abstract
AbstractRock-burst is one of the most serious risks associated with hard rock tunnelling and mining at high depths. Monitoring of acoustic emissions emitted by the rock-mass during excavation and their interpretation now permits the early assessment of failure events and makes the safe management of the construction works possible. A reliable set-up of the alarm threshold is thus fundamental for the correct implementation of the procedures planned to minimise rock-burst related risk. This paper focuses on a novel in situ test specifically developed to provide an experimental basis for a more accurate assessment of the alarm threshold during tunnelling, representative of the local geomechanical conditions. The test, thanks to the compression induced by two flat jacks at the tunnel side wall, produces an artificial failure process during which acoustic emissions are measured and correlated to the mechanical response of the rock-mass, without the typical limitations of scale that characterised the laboratory experiments. The new methodology, named the Mules method, was successfully tested during the excavation of some stretches of the Brenner Base Tunnel in the Brixner granite, affected by mild spalling episodes. The case-history is fully described in the paper to illustrate the practical application of the proposed approach.
Funder
Università degli Studi di Roma La Sapienza
Publisher
Springer Science and Business Media LLC
Subject
Geology,Geotechnical Engineering and Engineering Geology,Civil and Structural Engineering
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献