Progressive Damage Behaviours of Triaxially Confined Rocks under Multiple Dynamic Loads

Abstract

AbstractInvestigation of rock progressive damage under static confinement and strain rates facilitates the generation mechanism of natural fault damage zones. A triaxial Hopkinson bar apparatus is used to perform dynamic triaxial compression tests to examine the damage and degradation process of rocks subjected to multiple impacts. Dynamic mechanical properties are determined under a static triaxial pre-stress of (30, 20, 10) MPa and multiple dynamic loadings, with the repetitive impact velocity of 27 m/s and strain rates from 50 to 150/s. The acoustic characteristics are identified by ultrasonic measurement to qualify the damage values. The micro-crack parameters, including crack area and volumes are detected using synchrotron X-ray micro-computed tomography (μCT) to characterize the progressive damage. In addition, the microcrack orientation, density and fractal dimension are analysed from thin section. Experimental results show that dynamic stress-strain curves can be divided to elastic, nonlinear deformation and unloading phases. Dynamic peak stress, Young’s modulus and ultrasonic wave velocity decrease with increasing impact times. The high frequency of ultrasonic wave is filtered by the induced microcracks. The progressive damage and evolution of fracture networks are associated highly with microcrack initiation, propagation, branching and coalescence. Shear bands are commonly generated in granite, and tensile cracks are dominant in marble, while sandstone is mainly failed by compaction and deformation band. The absorbed energy of rock increases nonlinearly with increasing crack surface and volume. Besides, microcracks propagate primarily along the maximum principal stress; the density and fractal dimension exhibit an anisotropic distribution controlled by true triaxial confinement and dynamic impacts.