Coupled Thermo-hydro-mechanical Simulation of Hydraulic Fracturing in Deep Reservoirs Using Finite-Discrete Element Method

Abstract

AbstractHydraulic fracturing (HF) is one of the most effective stimulation techniques to enhance reservoir permeability. The efficiency of an HF fluid injection depends on the pre-existing discontinuities or sources of heterogeneities and these features need to be considered in a HF operation treatment. Moreover, deep reservoirs are usually located in hot dry rocks (HDR). Hence, thermal conduction through the rock and fluid and advection and convective heat transfer in the fluid can affect the fluid–rock interaction. This study focuses on HF development in deep reservoirs under a high-temperature field. Two separate scenarios are considered: a reservoir containing discrete fracture networks (DFN) and another considering blocks in a matrix as conglomerate reservoirs (there is no relation between the scenarios considered). The study discusses each reservoir separately and simulates their thermo-hydro-mechanical (THM) behaviour using the combined finite-discrete element method (FDEM). First, the capabilities of the FDEM are verified against the existing analytical solutions, and then the FDEM is employed to model HF development. The effects of controlling factors, including flow rate, fluid kinematic viscosity and DFN aperture for jointed reservoirs and flow rate, fluid kinematic viscosity and block strength in conglomerate ones, are studied. The results show that the high fracture density DFNs strongly affect the HF propagation pattern and fluid pressure rise. Moreover, the DFN’s aperture significantly alters the HF treatment behaviour. The controlling factors are observed to influence the HF pattern strongly, and a successful HF treatment requires careful consideration of all the factors. In the conglomerate reservoirs, the strength of the blocks strongly dominates the HF mechanism, in which soft blocks break and allow for uniform fluid pressure distribution and longer HFs, while hard blocks stop fluid from flowing over longer distances accumulating high fluid pressure around the injection. This mechanism excessively breaks the matrix and reduces HF efficiency. Crack branching frequently occurs in conglomerate reservoirs due to thermal exchange between the blocks, matrix, and fluid.