Tool and Die Making, Surface Treatment, and Repair by Laser-based Additive Processes

Abstract

AbstractThis paper explores the possibilities to use laser-based additive processes to make, surface treat and repair/remanufacture tools, dies and molds for cold working, hot working, and injection molding. The failures encountered in these applications are described. The materials used conventionally and in the laser additive processes are accounted for. The properties of the tools, dies and molds made by Laser-based Powder Bed Fusion (L-PBF) are as good as and in some cases better than the properties of those made in wrought materials. Shorter cycle time, reduced friction, smaller abrasive wear, and longer life cycle are some of the benefits of L‑PBF and Directed Energy Deposition with powder (DED-p) (or Laser Metal Deposition with powder, LMD‑p, or Laser Cladding, LC). L‑PBF leads to higher toolmaking costs and shorter toolmaking lead time. Based on a review of conducted investigations, this paper shows that it is possible to design and make tools, dies and molds for and by L‑PBF, surface functionalize them by DED-p (LMD‑p, LC), and repair/remanufacture them by DED-p (LMD‑p, LC). With efficient operational performance as the target for the whole tool life cycle, this combination of L‑PBF and DED-p (LMD‑p, LC) has the greatest potential for hot working and injection molding tools and the smallest for cold working tools (due to the current high L‑PBF and DED-p (LMD‑p, LC) costs).