Optimal Design, Development and Experimental Analysis of a Tension–Torsion Hopkinson Bar for the Understanding of Complex Impact Loading Scenarios

Abstract

Abstract Background Advanced testing methodologies and measurement techniques to identify complex deformation and failure at high strain rates have drawn increasing attention in recent years. Objective The objective of the current study is the development of a novel combined tension–torsion split Hopkinson bar (TTHB) conceived to generate a combination of tensile and torsional stress waves in a single loading case, and to measure material data representative of real case impact scenarios. Methods An energy store and release mechanism was employed to generate both the longitudinal and shear waves via the rapid release of a bespoke clamp assembly. A parametric study of the material and geometry of the clamp was implemented via numerical simulations to optimise critical aspects of the wave generation. Thin-walled tube specimens made of two metallic materials were utilised to examine the capability of the developed TTHB system by comparing the experimental measurements with those obtained from conventional split Hopkinson tension and torsion bars. Results The experimental results demonstrate that the synchronisation of the longitudinal and torsional waves was achieved within 15 microseconds. Different wave rise time were obtained via the controlled release of the clamp using fracture pins of various materials. The analysis indicates that the developed TTHB is capable of characterising the dynamic behaviour of materials under tension, torsion, as well as under a wide range of complex stress states. Conclusions The presented apparatus, testing and analysis methods allow for the direct population of the dynamic failure stress envelopes of engineering materials and for the accurate evaluation of existing and novel constitutive models.