Separation of overlapping phases for Se88Te10Ag2 glass

Abstract

AbstractResults of crystallization kinetics for Se88Te10Ag2 glass using differential scanning calorimetry under non-isothermal condition are described and discussed. The glass has a single glass transition and two crystalline phases that overlap. The Gaussian fit model was used to separate the overlapping crystalline phases. By applying the Matusita et al. approach to analyses the data, it was possible to determine the activation energy (Ec) and Avrami exponent (n) for the two phases. The average Ec values for the first and the second phases are 126.16 and 113.99 kJ mol−1, respectively. It was shown that the activation energy strongly depended on the heating rate. Using the Kissinger–Akahira–Sunose method, the variable activation energies with crystalline fraction are calculated. This variation demonstrates how the transition from the amorphous to the crystalline phase is a complicated process requiring several nucleation and growth mechanisms. It was discussed if the Johnson–Mehl–Avrami model to describe the crystallization for the composition under investigation. The results show SB(M, N) that model is more appropriate to represent the crystallization process for the examined composition. While the results agree with JMA models at low heating rates. Through the use of scanning electron microscopy and X-ray diffraction, the crystalline phases for the two stages were identified.