Precipitates evolution during isothermal aging and its effect on tensile properties for an AFA alloy containing W and B elements

Abstract

AbstractA 20Cr-25Ni-2.5Al alumina-forming austenitic alloy containing W and B elements was aged at 923 K for 5000 h, and the microstructure and tensile properties with different aging time were investigated. NiAl, σ and Laves were observed at grain boundaries (GBs) successively. The matrix was covered by NiAl and Laves with the extension of aging. The evolution of precipitates during aging contributed to the variation of tensile properties. Precipitation of nanosized NbC carbides within grains and σ phase at GBs led to a rapid increase in strength and a decrease in elongation for 500 h aging sample. In the later stage of aging, the coarsening of NiAl and Laves phases, as well as the reduction in dislocation density caused a decline in strength. The coarsening of precipitates upon aging time follows the Ostwald ripening theory. Due to its lower diffusion rate in austenite compared to Mo, W may accelerate the growth of Laves at GBs. Boron was mainly enriched in Laves instead of NiAl, NbC and σ phases after high temperature aging. The addition of W and B improved the precipitation strengthening of Laves, increasing the high temperature tensile strength after long term thermal aging. The difference in tensile properties between room temperature and 923 K is due to the ductile–brittle transition of NiAl. No σ phase was observed within grains even after 5000 h aging and elemental chromium particles occurred around Laves due to boron hindering the growth of σ.