Abstract
AbstractThe adsorption of chloroxylenol and chlorophene on halloysite-carbon composites was investigated in batch and flow systems. The synthesis of halloysite-carbon composites through two different methods was performed with microcrystalline cellulose as carbon precursor. The obtained halloysite-carbon composites were characterized by SEM/EDS analysis, the low-temperature nitrogen adsorption/desorption methods, and infrared spectrometry (FT-IR). The SEM/EDS analysis and FT-IR spectra confirmed the presence of carbon on the surface of the halloysite. On the basis of the measurement results in the batch system, the two composites with the best adsorption properties for both adsorbates were chosen for measuring the flow system (using the inverse liquid chromatography). Removal efficiency was equal to 92.26 and 81.36%. It was obtained for chloroxylenol on HNT-m 800 and HNT-Zn 500, respectively. For chlorophene, the removal efficiency had the value of 78.79 and 77.87% on HNT-m 800 and HNT-Zn 800, respectively. Adsorption parameters of chloroxylenol and chlorophene were determined with inverse liquid chromatography methods: the adsorption equilibrium constants were determined with the peak division method and the adsorption capacity of the adsorbents was determined with the breakthrough curve method. Maximum adsorption capacity for the adsorption of chloroxylenol on HNT-m 800 was 5.48 mg·g−1 and on HNT-Zn 500 its value was 2.77 mg·g−1. For the adsorption of chlorophene on HNT-m 800 the value was 4.44 mg·g−1 and on HNT-Zn 800–2.5 mg·g−1. Halloysite-carbon composites can be successfully used as effective adsorbents for removing chloroxylenol and chlorophene from solutions in the flow system.
Funder
„AKCELERATOR ROZWOJU Uniwersytetu Jana Kochanowskiego w Kielcach”
Ministerstwo Edukacji i Nauki
Publisher
Springer Science and Business Media LLC
Subject
Surfaces and Interfaces,General Chemical Engineering,General Chemistry
Reference59 articles.
1. Stefanakis, A.I., Becker, J.A.: A review of emerging contaminants in water: Classification, sources, and potential risks. In: McKeown, A.E., Bugyi, G. (eds.) Impact of Water Pollution on Human Health and Environmental Sustainability, pp. 55–80. IGI Global, Hershey (PA) (2015)
2. Sauvé, S., Desrosiers, M.: A review of what is an emerging contaminant. Chem. Cent. J. (2014). https://doi.org/10.1186/1752-153X-8-15
3. Gogoi, A., Mazumder, P., Tyagi, V.K., Chaminda, G.G.T., An, A.K., Kumar, M.: Occurrence and fate of emerging contaminants in water environment: a review. Groundw. Sustain. Dev. 6, 169–180 (2018). https://doi.org/10.1016/j.gsd.2017.12.009
4. Daughton, C.G., Ternes, T.A.: Pharmaceuticals and personal care products in the environment: agents of subtle change? Environ. Health Perspect. 107, 907–938 (1999). https://doi.org/10.1289/ehp.99107s6907
5. Ebele, A.J., Abdallah, M.A.E., Harrad, S.: Pharmaceuticals and personal care products (PPCPs) in the freshwater aquatic environment. Emerg. Contam. 3, 1–16 (2017). https://doi.org/10.1016/j.emcon.2016.12.004
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献