Author:
Song Dan,Liu Kai,Huang Yong,Zhihu Zhang
Publisher
Springer Science and Business Media LLC
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference18 articles.
1. M. Curioni, P. Skeldon, G.E. Thompson and J. Ferguson, Graded Anodic Film Morphologies for Sustainable Exploitation of Aluminium Alloys in Aerospace, Adv. Mater. Res., 2008, 723, p 524.
2. M. Subramanian, M. Sakthivel, K. Sooryaprakash and R. Sudhakaran, Optimization of End Mill Tool Geometry Parameters for Al7075-T6 Machining Operations Based on Vibration Amplitude by Response Surface Methodology, Measurement, 2013, 46(10), p 4005–4022.
3. M. Casuso, R. Polvorosa, F. Veiga et al., Residual Stress and Distortion Modeling on Aeronautical Aluminum Alloy Parts for Machining Sequence Optimization, Int. J. Adv. Manuf. Technol., 2020, 110, p 1219–1232.
4. L. Wang, F. Qiao, Y. Li et al., Optimization of Clamping for Thin-Walled Rotational Conical Aluminum Alloy with Large Diameter: Modal Simulation and Experimental Verification, Int. J. Adv. Manuf. Technol., 2021, 114, p 2387–2396.
5. A. Madariaga, I. Perez, P.J. Arrazola et al., Reduction of Distortions in Large Aluminium Parts by Controlling Machining-Induced Residual Stresses, Int. J. Adv. Manuf. Technol., 2018, 97, p 967–978.