Author:
Kuliiev Ruslan,Riekehr Stefan,Ventzke Volker,Keller Sören,Kashaev Nikolai
Abstract
AbstractAn increase of testing frequency to reduce the testing time could affect the fatigue behavior of metallic materials. The current paper investigates the effect of testing frequency on the high and very high cycle fatigue behavior of AA2024, Ti-6Al-4V, and Inconel 718 alloys tested at 20, 90, and 1000 Hz. To quantify the effect of testing frequency a two-parameter Weibull distribution and Basquin’s equation were utilized as well as the threshold stress intensity factor range was determined. Fatigue crack initiation sites were evaluated on the fracture surface with respect to different testing frequencies. The results showed that changes in the testing frequency significantly influence the mechanical response of the Ti-6Al-4V alloy, while no substantial impact on the fatigue properties of AA2024 and Inconel 718 alloys was identified. The findings of the study contribute to a more complete knowledge of the frequency sensitivity of the alloys and provide valuable insights for the design and evaluation of materials used in high-frequency applications.
Funder
Helmholtz-Zentrum hereon GmbH
Publisher
Springer Science and Business Media LLC
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference59 articles.
1. S. Khan, O. Kintzel, and J. Mosler, Experimental and Numerical Lifetime Assessment of Al 2024 Sheet, Int. J. Fatigue, 2012, 37, p 112-122. https://doi.org/10.1016/j.ijfatigue.2011.09.010
2. C. Veiga, J.P. Davim, and A.J.R. Loureiro, Properties and Applications of Titanium Alloys: a Brief Review, Rev. Adv. Mater. Sci., 2012, 32(2), p 133-148.
3. I. Inagaki, Y. Shirai, T. Takechi, and N. Ariyasu, Application and features of titanium for the aerospace industry, Nippon Steel Tech. Rep., 2014, 106(106), p 22-27.
4. A.A. Shanyavskiy, Very-High-Cycle-Fatigue of in-Service Air-Engine Blades, Compressor and Turbine, Sci. China: Phys. Mech. Astron., 2014, 57(1), p 19-29. https://doi.org/10.1007/s11433-013-5364-2
5. X. Liu, C. Sun, and Y. Hong, Effects of Stress Ratio on High-Cycle and Very-High-Cycle Fatigue Behavior of a Ti-6Al-4V Alloy, Mater. Sci. Eng. A., 2015, 622, p 228-235. https://doi.org/10.1016/j.msea.2014.09.115
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献