Abstract
AbstractThe influence of pre-strain on the very-low-cycle loading behavior as occurring, for example during roller leveling of sheet metals, is not yet fully understood. A key factor in this context is the stiffness of the material and its changes upon processing. To study the general mechanical property changes during low-cycle loading with small amplitudes for a wide variety of metals, sheet samples of mild steel DC01, pure copper CU-DHP and α-titanium are subjected to low-cycle tension–compression tests. The general influences of pre-strain and the applied strain amplitude are investigated regarding material hardening and changes in the elastic properties. It is shown that all tested materials feature changes in the Bauschinger behavior during cycling. The apparent elastic modulus of the materials decreases with increasing accumulated plastic strain, and the evolution depends on the strain amplitude and the pre-strain. For all three materials, changes in technical springback are present and depend on the loading history.
Funder
Gottfried Wilhelm Leibniz Universität Hannover
Publisher
Springer Science and Business Media LLC
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference18 articles.
1. R.K. Lal, V.K. Choubey, J.P. Dwivedi and S. Kumar, Study of Factors Affecting Springback in Sheet Metal Forming and Deep Drawing Process, Mater. Today Proc., 2018, 5, p 4353–4358.
2. S. Münstermann, Y. Sparrer, Y. Yao, J. Lian, R. Meya, T. Clausmeyer and A.E. Tekkaya, Effect of Plastic Strain and Ductile Damage on Elastic Modulus of Multiphase Steel and Its Impact on Springback Prediction, AIP Conf. Proc., 2019 https://doi.org/10.1063/1.5112739
3. A. Abvabi, J. Mendiguren, A. Kupke, B. Rolfe and M. Weiss, Evolution of Elastic Modulus in Roll Forming, Int. J. Mater. Form., 2017, 10(3), p 463–471.
4. T. Evertz, H.-M. Sonne, G. Steinbeck and B. Engl, Werkstoffverhalten Unter Zügiger Elastischer Beanspruchung, Materwiss. Werksttech., 2004, 35(8), p 514–521. https://doi.org/10.1002/mawe.200400768
5. S.B. Chikalthankar, G.D. Belurkar and V.M. Nandedkar, Factors Affecting on Springback in Sheet Metal Bending: A Review, Int. J. Eng. Adv. Technol., 2014, 3(4), p 247–251.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献