Residual Stress Analysis of Re-autofrettage of a Swage-Autofrettaged Tube by Computer Modeling Incorporating Accurate Material Representation

Abstract

AbstractAutofrettage processes allow engineers to reduce the thickness of thick-walled cylinders or components in high-pressure applications without sacrificing strength, life, or safety. However, during the autofrettage process, residual stresses will be generated due to plastic deformation. The complex tube material behavior is dominated by the Bauschinger effect. A better understanding and accurate prediction of the residual stress field is critical, which will enable better piping design strategies to minimize deformation and stresses under operating conditions. This study aims to predict and analyze residual stresses resulting from hydraulic re-autofrettage of a swage-autofrettaged thick-walled cylinder by computer modeling. A case study was performed on a thick-walled cylinder of A723 alloy with a radial interference of 2.5%. In order to investigate the effect of the chosen material constitutive representation, results based on the true material constitutive model were compared with the simplified prevalent material model of bi-linear kinematic strain hardening. Computer implementation for the true material was via a user-developed subroutine that incorporates the complex Bauschinger effect. The results indicate that an accurate material constitutive representation is crucial for better and more accurate prediction and understanding of residual stresses induced by autofrettage processes. Computer modeling based on the true material constitutive representation will likely prove to be a powerful tool for the design of autofrettage processes in general and thick-walled cylinders in particular.