Abstract
AbstractFTIR spectral identification is today’s gold standard analytical procedure for plastic pollution material characterization. High-throughput FTIR techniques have been advanced for small microplastics (10–500 µm) but less so for large microplastics (500–5 mm) and macroplastics (> 5 mm). These larger plastics are typically analyzed using ATR, which is highly manual and can sometimes destroy particles of interest. Furthermore, spectral libraries are often inadequate due to the limited variety of reference materials and spectral collection modes, resulting from expensive spectral data collection. We advance a new high-throughput technique to remedy these problems using FTIR microplate readers for measuring large particles (> 500 µm). We created a new reference database of over 6000 spectra for transmission, ATR, and reflection spectral collection modes with over 600 plastic, organic, and mineral reference materials relevant to plastic pollution research. We also streamline future analysis in microplate readers by creating a new particle holder for transmission measurements using off-the-shelf parts and fabricating a nonplastic 96-well microplate for storing particles. We determined that particles should be presented to microplate readers as thin as possible due to thick particles causing poor-quality spectra and identifications. We validated the new database using Open Specy and demonstrated that additional transmission and reflection spectra reference data were needed in spectral libraries.
Graphical abstract
Funder
Possibility Lab
McPike Zima Charitable Foundation
Helmholtz Data Science Academy
National Renewable Energy Laboratory
Publisher
Springer Science and Business Media LLC
Subject
Biochemistry,Analytical Chemistry
Reference48 articles.
1. Cowger W, Gray A, Christiansen SH, DeFrond H, Deshpande AD, Hemabessiere L, et al. Critical review of processing and classification techniques for images and spectra in microplastic research. Appl Spectrosc. 2020;74(9):989–1010.
2. Primpke S, Christiansen SH, Cowger W, De Frond H, Deshpande A, Fischer M, et al. Critical assessment of analytical methods for the harmonized and cost-efficient analysis of microplastics. Appl Spectrosc. 2020;74(9):1012–47.
3. Wong C, Coffin S. Standard operating procedures for extraction and measurement by infrared spectroscopy of microplastic particles in drinking water [Internet]. State Water Resources Control Board; 2021. Available from: https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/documents/microplastics/mcrplstcs_ir.pdf. Accessed 10 Jan 2024.
4. Primpke S, Wirth M, Lorenz C, Gerdts G. Reference database design for the automated analysis of microplastic samples based on Fourier transform infrared ({FTIR}) spectroscopy. Anal Bioanal Chem. 2018;410:5131–41.
5. De Frond H, Rubinovitz R, Rochman CM. μATR-FTIR spectral libraries of plastic particles (FLOPP and FLOPP-e) for the analysis of microplastics. Anal Chem. 2021;93(48):15878–85.